Mobile technology creates opportunities for new operators to enter the networking business with lower investment comparing to building fixed-line infrastructures. To fixed-line operators, mobile network is more important as a backup to offload congested bandwidth for higher customer satisfaction, as such mobile networking is the trend that operators can never resist. Zyxel, as a global leader of broadband networking, always stays ahead of the trend to offer the market with innovative designs.

The Zyxel LTE3302 Series 4G LTE Indoor Router/IAD employs LTE — the latest mobile broadband technology with high popularity — to deliver the best data rates possible at up to 150/50 Mbps (DL/UL). With bridge and router modes embedded, the Zyxel LTE3302 Series is adaptive to all kinds of devices/gateways for seamless integration with your CPE on-hand in a simple yet complete way to meet your needs.

Maximum freedom of mobility
The Zyxel LTE3302 Series provides wireless broadband connectivity and seamless switching among 4G LTE, DC-HSPA+, 3G, EDGE and GPRS that allows the freedom to surf the Internet and access any information at home, in the office or anywhere under LTE coverage without wire connection.

Embedded bridge/router mode adapts to most devices/gateways
For better network integration, Zyxel embeds both bridge and router modes into the Zyxel LTE3302 Series. Users can take advantage of the built-in routing functions in all typical applications, while the bridge mode is designed to work with users’ existing or preferred devices such as high-end WiFi access points, small business gateways or enterprise gateways.

Continuity Internet sharing
With Micro USB power port, you can use it as a portable router when you’re traveling, fishing or watching football games. As higher-capacity power banks or car chargers are widely available, it’s easy to use the Zyxel LTE3302 Series for an extended time for continuous Internet sharing.

Non-stop connectivity with LTE 2nd WAN for fail-over
Multi-WAN fail-over relieves the risk of network outage depending on single WAN technology. Even better, wireless LTE connectivity allows you to maintain a second WAN option without a cable plan. As long as the gateway supports “multi-WAN fail-over”, you can just connect the Zyxel LTE3302 Series to an existing gateway and set LTE as the fail-over WAN.

Circuit-switched and VoLTE support for seamless voice migration
Technologies behind voice services vary by operators; some utilize the “packet-switched” method and some choose “circuit-switched”. Thanks to the LTE3312 supports to both technologies, you don’t have to worry about voice functions supported by your operator. You can easily migrate the voice functions to LTE3312 Series over LTE network.

Zyxel LTE3302. Wi-Fi band: Single-band (2.4 GHz), Top Wi-Fi standard: Wi-Fi 4 (802.11n), WLAN data transfer rate (max): 300 Mbit/s. Ethernet LAN interface type: Fast Ethernet, Networking standards: IEEE 802.11b,IEEE 802.11g,IEEE 802.11n, Ethernet LAN data rates: 10,100 Mbit/s. 2G standards: EDGE,GPRS,GSM, 3G standards: DC-HSPA+,HSPA+,HSUPA,UMTS, 4G standard: LTE. Security algorithms: 64-bit WEP,128-bit WEP,SSID,WPA,WPA2,WPA2-PSK, MAC address table: 32 entries. Voice codecs: AMR,AMR-WB,CNG,G.711u,VAD

wireless routers