Allied Telesis
AT-2711FX/SC-001
Allied Telesis AT-2711FX/SC-001, Internal, Wired, PCI Express, Fiber, 100 Mbit/s
The Allied Telesis AT-2711FX PCI-Express delivers the maximum possible Fast Ethernet throughput due to the highly efficient PCI-Express bus architecture. This provides fast networking connectivity even when other cards are installed in your computer. Available in LC, SC, ST, or MT connector types.
Allied Telesis AT-2711FX/SC-001. Internal. Connectivity technology: Wired, Host interface: PCI Express, Interface: Fiber. Maximum data transfer rate: 100 Mbit/s
networking cards
| 28143 | |
| Ports & interfaces | |
| Connectivity technology: | Wired |
| Host interface: | PCI Express |
| Interface: | Fiber |
| Fiber ports quantity: | 1 |
| Fiber optic connector: | SC |
| PCI version: | 1.0 |
| Networking | |
| Maximum data transfer rate: | 100 Mbit/s |
| Networking standards: | IEEE 802.1Q,IEEE 802.1as,IEEE 802.1p,IEEE 802.2,IEEE 802.3ac,IEEE 802.3u,IEEE 802.3x |
| Ethernet LAN: | Y |
| Ethernet interface type: | Fast Ethernet |
| Ethernet LAN data rates: | 10,100 Mbit/s |
| Cabling technology: | 10/100BaseT(X) |
| Security algorithms: | SNMP |
| Wake-on-LAN ready: | Y |
| Full duplex: | Y |
| Flow control support: | Y |
| Jumbo frames support: | Y |
| Quality of Service (QoS) support: | Y |
| VLAN tagging: | Y |
| Design | |
| Internal: | Y |
| LED indicators: | Y |
| RoHS compliance: | Y |
| Power | |
| Power consumption (typical): | 2 W |
| Operational conditions | |
| Operating temperature (T-T): | 0 - 50 °C |
| Storage temperature (T-T): | -25 - 70 °C |
| Operating relative humidity (H-H): | 5 - 90% |
| System requirements | |
| Windows operating systems supported: | Y |
| Linux operating systems supported: | Y |
| Weight & dimensions | |
| Width: | 77 mm |
| Height: | 69 mm |
| Weight: | 50 g |
| Other features | |
| Receive Side Scaling (RSS): | Y |
| ACPI version: | 2.0 |
If you feel like anything is missing in these specifications, don't hesitate to contact us and raise the issue.
